1 mj connector modular jack connectors ? ? ? ? ? ? circuit no.1 circuit no.1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? circuit no.1 specifications ?current rating: 1.3a ac, dc ?voltage rating: 250v ac, dc ?temperature range: -40?c to +80?c ( including temperature rise in applying electrical current) ?contact resistance: initial value/20m ? max. after environmental testing/40m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 1,000v ac/minute ?applicable pc board thickness: 1.6mm 2.4mm (8 circuits straight type) * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e174260 1 certified lr20812 conforms to fcc standards (6 circuits and 8 circuits mj connector) ?upper contact point ?metal hook ?shielding effect ?grounding ?correspond to high-speed lan transmission (mj-88u-sd315k-t) connector normal type 2/6 type 4/6 type 6/6 type note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details.
2 mj connector model no. circuits type q'ty / box mj-62j-rd315 mj-64j-rd315 mj-66j-rd315 mj-44j-rd315 mj-62c-sd335 mj-64c-sd335 mj-66c-sd335 mj-62d-sd335 mj-64d-sd335 2/6 4/6 6/6 4/4 2/6 4/6 6/6 2/6 with dc jack 4/6 with dc jack normal type straight type 2 4 6 4 2 4 6 2 4 material and finish contact: normal type/ phosphor bronze, nickel-undercoated, mating part; gold-plated 1.27 m min. solder tail; tin-plated (reflow treatment) straight type/ phosphor bronze, nickel-undercoated, mating part; gold-plated 1.27 m min. overall; gold-plated (flash) housing: glass-filled pbt, ul94v-0 hook pin: brass, tin-plated (reflow treatment) moving contact (spring): copper alloy, tin-plated (reflow treatment) [with-dc-jack type only] stationary contact (pin): brass, nickel-undercoated, tin/copper alloy-plated [with-dc-jack type only] 270 270 270 306 180 180 180 108 108 ? ? ? ? ? ? ? circuit no.1 ? ? ? ? ? ? ? circuit no.1 3 ? ? ? ? ? ? ? circuit no.1 3 ? ? ? ? circuit no.1 ? ? ? ? ? 3 ? y ? ? ? ? ? ? ? ? ? ? 3 ? ? circuit no.1 ? y ? ? ? ? ? ? ? ? ? ? ? ? 3 ? circuit no.1 connector and pc board layout (viewed from component side) normal type 4/4 type straight type 2/6 type 4/6 type 6/6 type 4/6 type with dc jack 2/6 type with dc jack rohs compliance this product displays (lf)(sn) on a label. the product with dc jack displays (lf) on a label. note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details.
3 mj connector material and finish model no. circuits type q'ty / box mj-88h-rd315k MJ-88R-RD315K mj-88u-sd315k-t normal type (with shielding) normal type (with plastic hook) straight type (with shielding) 8 8 8 contact: phosphor bronze, nickel-undercoated, mating part; gold-plated 1.27 m min. solder tail; tin-plated (reflow treatment) housing: glass-filled pbt, ul94v-0(normal type) glass-filled lcp, ul94v-0(straight type) shield cover: phosphor bronze, tin-plated (reflow treatment) [normal type,straight type] shield pin: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) [straight type] 520 520 144 model no. circuits q'ty / box mj-jp56k mj-jp68k 6 8 material mj-jp56k: pa 66, ul94v-0 mj-jp68k: pbt, ul94v-0 500 1,000 ? ? p.c.board edge connector edge ? ? y ? ? ? ? ? y circuit no.1 ? ? ? ? ? ? ? ? ? ? ? circuit no.1 y ? ? ? p.c.board edge connector edge ? ? ? y circuit no.1 connector and pc board layout (viewed from component side) 8 circuits normal type (with shielding) 8 circuits straight type (with shielding) 8 circuits normal type (with plastic hook) rohs compliance this product displays (lf)(sn) on a label. note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. 3. straight type product is designed for pressing the boss of housing into a pc board and mounting it on a pc board. cap for dust 6 circuits 8 circuits rohs compliance note: not ul/csa approved.
|
